Reviews (18)
Write a review
The trigger works well but I had to shim the space below the safety with a piece of electrical tape for it to slide back and forth. It would bind up when I tightened the stock and receiver together without this shim.
Posted by Larry Krizan on Nov 29th 2019
Swapped out the factory trigger in my X-Bolt Long Range. Ordered the trigger set to 2 pounds. Took maybe 10 minutes to install. This trigger 100% better than the factory. Zero creep and very crisp break. Highly recommend upgrade for ever rifle you shoot.
Posted by Jason Watkins on Nov 26th 2019
Don' be lured by a $12 spring kit to correct a so-so factory Browning trigger. Get what you pay for and put a Timney in that X-bolt! Factory set at 2 pounds, Quick delivery and easy installation once I located my 1/16 inch punch. Great product, great company, great people. Even got a lollipop in the box as a bonus!
Posted by Mike N on Oct 19th 2019
This trigger came in and worked exactly as advertised. Tech support advised of possible issue of fit up being tight. Had to open up slightly for safety to operate smoothly. Could not be happier with performance. My groups tightened up. Last group all touching at 200 yards!
Posted by Ronal Rapier on Sep 5th 2019
Easy installation, and I didn't need to relieve any interference in the stock as a few have mentioned.
Beautiful crisp break at 1.5 lbs, I may adjust it up around 2 for hunting. I'd replaced the factory sear spring previously which claimed a 50% reduction in pull weight but didn't see any improvement.
The only thing I liked about the factory trigger was the gold color. This rifle is sub MOA now for the first time, and with a variety of ammunition.
Great upgrade and I highly recommend this trigger.
Posted by David on Aug 13th 2019
Great trigger. Easy to install.
Posted by Jared Arnaud on Aug 11th 2019
Easy to install. The trigger was set as requested. Good Job.
Posted by Charles Miles on Aug 9th 2019
I own two Timney triggers. I installed them in two Browning X-Bolt rifles. Very, very high quality triggers. They have a wider adjustment range than do the Browning triggers and have a very crisp, no creep pull.
Posted by Daniel Griffith on Jul 30th 2019
Another great trigger from Timney. Improved my shooting groups right off the bat after installing the trigger. Installation was simple and took about 20 minutes. This is my second trigger from Timney and will continue to do business with them in the future. Staff was friendly and professional. Great product.
Posted by Mike on Jul 29th 2019
Trigger came as advertised, clean break, set at ordered poundage, fit like a glove, I would advise a timney trigger to anyone wanting to get more accuracy out of their rifle. Great Product!!
Posted by Scott on May 28th 2019
Works as described, much better than the (way over talked about junk stock trigger)
Posted by Dennis Dill on Mar 20th 2019
Easy installation.Minor stock modification. 1.5lbs on Wheeler pull gauge. Great trigger. A must have for long range .
Posted by Steve Hammond on Jan 10th 2019
If you get this trigger for an X-Bolt Stainless Stalker, and I suspect many other X-Bolts, you are going to need a dremel tool to remove material inside the stock in order for the trigger to work. Would have been nice if Timney stated that upfront. The safety bar that connects the safety button gets stuck on the inside of the stock. Timney should improve the instructions sheet and illustrate best practices for solving this problem.
Posted by Joe on Dec 4th 2018
I bought this trigger because my x bolt was set at 4 lbs and wouldn't move lower. The timney trigger was very easy to install. I have it set at 2 lbs and the rifle is much nicer to shoot. I like it a lot. Buy one, you will like it.
Posted by David Schlattman from IL on Aug 12th 2018
Great quality trigger! Just like very other Timney I have bought, I love these triggers.
I had to open up the front pin saddle a little bit, as it was a hair to narrow. I also had to clearance the inside of stock on my hells canyon for safety bar clearance, but it was worth the little extra work to have such a great trigger.
Posted by
Jared Chamberlain from Oklahoma on Jul 29th 2018
I bought my X Bolt Hells Canyon Long Range 6.5 Creedmoor gun last September. Great gun but was limited by the Godzilla trigger pull. Browning said Feather Weight adjustable. Hate to see what kind of bird has those feathers! I set the trigger as low as possible and at best was 3.1 lbs pull. Then just what I was looking for! Bought the Timney trigger last two weeks ago. Installed it in about 10 minutes, set the trigger to 1.5 lbs and took it to the 300 yard range. Now I have a shooter. Put a 2.5" group together with 10 shots first time out. Before that it was 4 to 6 inch on a good day. Great job Timney!!!! Can you make the trigger gold plated?
Posted by Bruce Rebechini from Yorkville IL on Jul 16th 2018
I’ve owned my Browning X-Bolt for several years and was fed up with the trigger pull. Replaced it with a Timney trigger set @ 1.25 lbs. crisp clean pull. Changed gun from mediocre to a shooter. Couldn’t be happier.
Posted by Ed from Tennessee on Jul 16th 2018
Set to 1.5 lbs, and never look back. Once again, Timney delivers. Little bit of fitting on the right side below the Safety bar in the stock.
Posted by Randall Leonard from Hawaii on Jul 16th 2018
