A-Bolt Spring Kit

(8 reviews) Write a Review
  • A-Bolt Spring Kit

The Timney Browning A-Bolt Spring Kit consists of two springs that will reduce your trigger's weight of pull. Easy to install. Includes 1.5-2 lb and 2-3 lb springs.

Since it was founded in 1946, Timney Triggers has built a reputation based on the quality of its products. Because of the precision machining and workmanship that goes into each Timney product they are The World's Finest Triggers.™ Each and every Timney Trigger is individually tested and calibrated by hand in the action it was designed for before it's delivered to the customer's door.

Note: Does not fit A-Bolt II or III models. Only the original Browning A-Bolt.

What Is Trigger Pull weight?

Pull weight is the amount of force, in ounces or pounds, required to fire the trigger. Or in other words, how hard you have to squeeze the trigger to shoot your rifle. Timney Trigger experts at our Phoenix, Arizona plant hand-test every trigger in its intended action and then set the pull weight at our factory standard, 3 lbs.

If you prefer a different pull weight you simply select it from the drop down above and your Timney Trigger will be customized to your preference.
The #1 reason to replace your factory trigger with a Timney is accuracy. A lighter, crisper, more consistent trigger pull will make you more accurate with your firearm.

Below is a guide for pull weight selection:

2-2.5 pounds
Light trigger pull weights are great for people shooting lighter weight rifles as they can help keep you on target during the shot. Also common weights for target shooting from a bench.

3-3.5 pounds
By far the most common trigger pull weights -this is great for virtually all applications including target shooting, hunting and 3-gun competitions.

4.0 pounds+
Heavy trigger pull weights are good for cold weather hunting or applications where you may be shooting with gloves on.


A-Bolt Rifles
  • 5
    browning trigger spring kit

    Posted by randy on Nov 30th 2019

    I had a heavy trigger pull on my Browning version 2. Ordered a version 1 spring kit. I worked just fine. Was very easy to install. Good instructions included. Now i have a great light trigger pull.

  • 5
    trigger spring

    Posted by westley thomas belcher on Nov 1st 2019

    smooth as silk, huge difference than stock trigger

  • 5

    Posted by Jason Sherwood on Jul 10th 2019

    I used this spring kit on a new Browning 300WSM that came from the factory with a very hard trigger pull and it turned an obnoxious trigger into a pleasant trigger. I can't say enough about how much better it is.

  • 5
    A- Bolt Spring Kit

    Posted by Jason Sherwood on Jul 8th 2019

    I put the spring kit in my Browning A-Bolt II and it worked great. Much better than the factory spring.

  • 5
    browning a-bolt trigger springs

    Posted by Jeffrey Stamper on Jun 25th 2019

    very easy job. and makes a world of difference in the gun. i wish i would have done this a long time ago.

  • 5
    So much better

    Posted by Shannon Bollinger from KS on Aug 17th 2018

    Bought this for my Browning 300 win mag.. always had a very hard trigger pull on it. After replacing with the lighter spring and having it tested.. it pulled at 11 ounces! I love a light trigger and this made a huge difference in my groupings. And replacing the spring was very easy as well. Wish I would have done this years ago!

  • 5
    Great replacement on A-Bolt 2

    Posted by   Dave from California on Aug 5th 2018

    My Browning A Bolt 2 had a super stiff trigger. I found this while looking into other Timney products. I bought it and installed it before my last range session. I used the lighter of the 2 springs sold as a kit. It is so much easier to concentrate on the target and forget about the trigger pressure. My groups were very tight even for a .300 Win Mag.
    I am completely satisfied with this product.

  • 5
    A-Bolt spring kit

    Posted by Steve Royer from Utah on Jul 16th 2018

    The spring kit was a simple solution to a worrisome problem. I am very satisfied with the results.